RVDT:Out and NAI 64DL1

Reference Information RVDT:Out

I/O Card Model Number

CS-NA-76CL1-x.

I/O Driver Model Number

WCS-NA-76CL1.

I/O Module License:

ICS-SWB-1216.

Reference Information NAI 64DL1

I/O Card Model Number

via RIQ

I/O Driver Model Number

N/A.

I/O Module License:

ICS-SWB-1234.

Mappings Table

Channel Column

Channel number. Odd channels are not available if the corresponding even channel is in 3 or 4 wire mode.

Type Column

Whether the channel is in 2 wire mode or 3 or 4 wire mode. This can only be set on the even channels. When an even channel is set to 3 or 4 wire mode, the corresponding odd channel is not available.

Ratio Column

Transform ratio. The transform ratio is always shared by even-odd channel pairs.

Mapped Point(s) Column

Output point a channel is mapped to. To map a point to a channel, select a channel on the left side of the I/O Mappings form, then click on a check box for an I/O point on the right side of the form. See I/O Mappings... for details.

Synchronous I/O Task: rvdtout

This analog output process writes the 6 (3 or 4-wire mode) or 12 (2-wire mode) output channels to a single RVDT hardware board.

The raw value is expected to be a floating point value between -1.0 and 1.0.

One instance of this process is run for each board configured in the RTDB.